How to use:

Step 1: Wash vehicle – Remove any surface grime, dirt and debris.

Step 2: Surface Clay Mitt – Use clay glove to remove deeply embedded debris and nano impurities.

Step 3: Paint correction and polish – Depending on paint condition use the necessary paint correction procedures to ensure optimum finish and removal of paint holograms.

Step 4: IPA Spray – Remove any chemicals, waxes, polishes that may still be present.

Step 5: Shake bottle before use.

Step 6: Spray a liberal amount on the microfiber block ensuring area is wet.

Step 7: Apply both horizontally and vertically to an area approximately 30cm x 30cm at a time

Step 8: Buff off area within 30 seconds using microfiber cloth

Step 9: Apply a second microfiber cloth to buff off excess residue before moving to next section.