Electromagnetic Rust Protection Module
Benefits:
Patented technology utilizing Alternate Current (AC).
– Specifically designed for automobiles.
– Clean, environmentally friendly and easy to install.
– Effective (Tests show up to 99.7% reduction of corrosion on automotive sheet metal)
– Enhances the zinc coating of the steel to increase the protection against corrosion by a factor of up to 100.
– Portable from vehicle to vehicle
– Draws only 0.3 milliamps of power from the battery.
How to Install:
Step 1: With the engine turned off, select a location under the hood to mount the Module such as the firewall or strut tower. Keep away from the exhaust manifold or any other hot or moving components.
Step 2: Using the alcohol cleaning pad, clean the surface area where the module is to be installed. Remove the backing from the Velcro pad and press the module firmly into place.
Step 3: Connect the black wire to the negative battery terminal or locate a convenient battery ground.
Step 4: Run the red power wire directly to a +12 volt constant power source.
Step 5: The green output wire that delivers the pulse current signal to be vehicle body panels must be secured properly to bare metal on a grounded body panel and must be at least 48” from where the black ground wire was connected.